Mobile electrical high-end operating table
Series medifa 7000
The medifa 7000 mobile operating table is the all-rounder among the medifa operating tables. In terms of flexibility and expandability, optimum base height (600 mm), ease of use and extremely high load capacity (544 kg total load), this operating table meets the highest requirements in the operating room.
Models
The medifa 7000 is available in two different versions. The models are equipped with the electromechanical basic functions of height, Trendelenburg, lateral, backrest and leg rest adjustment as well as flex and beach-chair positioning. The operating tables differ in the number of electrically adjustable joints. All models are equipped with longitudinal sliding of table top and can have optionally electric drive or safety system.
Model 700300
In addition to the basic functions, the 700300 version has an additional joint for electrical adjustment of the upper back rest, which allows the kidney elevator to be easily adjusted using the hand switch or the control unit at the column.
Electrical functions
1Specifications
| Electromechanical functions | |
| Height adjustment | 600 -1100 mm |
| Trendelenburg | -30° / +30° |
| Lateral tilt | -20° / +20° |
| Lower back rest adjustment | -45° / +80° |
| Upper back rest adjustment | -40° / +50° |
| Leg rest adjustment (individually or simultaneously) | -90° / +80° |
| Kidney bridge | ✓ |
| Flexion | ✓ |
| Simultaneous leveling | ✓ |
| Central brake (Stabilization cylinder) | ✓ |
| Longitudinal sliding | ✓ |
| Further information | |
| Table length (incl. head- and leg rest) | 2180 mm |
| Table width | 550 mm |
| Table width incl. side rails | 610 mm |
| Maximum permissible overall load | 544 kg |
| Weight of table | ca. 270 kg |
| Power supply | 110 V or 220 V / 50-60 Hz |
2Basic configuration
- Height adjustment from 580 to 1100 mm
- Trendelenburg adjustment from -30 ° to + 30 °
- Lateral adjustment up to 20 °
- Backrest adjustment from -45 ° to + 80 °
- Electromechanical leg plate adjustment from -90 ° to + 80 °, individually or synchronously
- Possibility of reverse storage
- Flex / reflex position electromechanically adjustable
- Automatic, simultaneous zeroing of the lying surface
- Hand switch and operating unit on the table column for function release
- Central brake by means of 4 between the double rollers extendable stand cylinders
- Viscoelastic comfort upholsteries with memory effect, h = 80 mm, electrically conductive
- Replaceable back support systems
- Maximum permissible load of the operating table: 544 kg (1,200 lbs)
Model 700200
The model 700200 has two electrically adjustable joints, which can be used to adjust the back section and the leg rests. Furthermore, the 700200 has all the functionalities of a modern mobile operating table.
Electrical functions
1Specifications
| Electromechanical functions | |
| Height adjustment | 600 -1100 mm |
| Trendelenburg | -30° / +30° |
| Lateral tilt | -20° / +20° |
| Back rest adjustment | -45° / +80° |
| Leg rest adjustment (individually or simultaneously) | -90° / +80° |
| Flexion | ✓ |
| Simultaneous leveling | ✓ |
| Central brake (Stabilization cylinder) | ✓ |
| Longitudinal sliding | ✓ |
| Further information | |
| Table length (incl. head- and leg rest) | 2180 mm |
| Table width | 550 mm |
| Table width incl. side rails | 610 mm |
| Maximum permissible overall load | 544 kg |
| Weight of table | ca. 270 kg |
| Power supply | 110 V or 220 V / 50-60 Hz |
2Basic configuration
- Height adjustment from 580 to 1100 mm
- Trendelenburg adjustment from -30 ° to + 30 °
- Lateral adjustment up to 20 °
- Backrest adjustment from -45 ° to + 80 °
- Electromechanical leg plate adjustment from -90 ° to + 80 °, individually or synchronously
- Possibility of reverse storage
- Flex / reflex position electromechanically adjustable
- Automatic, simultaneous zeroing of the lying surface
- Hand switch and operating unit on the table column for function release
- Central brake by means of 4 between the double rollers extendable stand cylinders
- Viscoelastic comfort upholsteries with memory effect, h = 80 mm, electrically conductive
- Replaceable back support systems
- Maximum permissible load of the operating table: 544 kg (1,200 lbs)
Positioning examples
Arm and hand surgery
